
Fences & gates in Kent.
Cedar fences and gates for Kent: long, level runs for East Hill and West Hill lots, set deep enough for the Green River Valley's high water table.
Kent splits cleanly between its valley and its hills. The flat Green River Valley floor is warehouse and industrial country with a high water table and floodplain soils that stay wet most of the year, while East Hill and West Hill carry the bulk of the residential blocks up on the bluffs. Those hill lots tend to run larger, which means long perimeter fence lines where every post has to stay plumb and the top line has to read dead level. We build for whichever ground your lot sits on: posts 24 inches in concrete on a gravel base, below frost line, hot-dip galvanized hardware, cedar laid out by hand on a string line and finished like furniture.
- Board-on-board western red cedar privacy for larger hill lots
- Horizontal cedar slat for cleaner-lined newer homes
- Commercial privacy-slat chain-link with automated access for valley sites
- Braced and automated driveway gate
What we watch for in Kent.
High water table, wet valley
The Green River Valley floor sits on floodplain soil with a high water table that stays saturated and heaves shallow posts. We trench to a gravel base and set 24 inches deep below frost line so a valley-floor run, residential or light-commercial, holds plumb through the wet season.
Long runs on hill lots
East Hill and West Hill lots run larger than the valley parcels, so fence lines travel far and any post out of plumb shows. We lay out by hand on a string line and keep post heights consistent so a long bluff-top perimeter reads straight from the street.
Kent's own city code
Kent runs the Kent City Code rather than Seattle SDCI, with different rules for the industrial valley and the residential hills, plus any floodplain overlays down low. We confirm the city's height and setback limits for your specific lot before a post goes in.
Ready for an entrance worth arriving through?
Tell us about your property. We'll walk the line with you, talk through the build, and put a straight written estimate in your hands.
